The 10mm Offset Tube Clamp, Ti is used to connect any component with 30 mm tube system. The four set screws are used for anchoring the mating pyramid system as well as for making angular adjustment for alignment. The offset is set at 5mm from the center of the tube clamp. It is ideal for usage when extra alignment is needed. It is also ideal when using with pin suspension locks, where prosthetic and pin alignment can be easily adjusted using the offset clamp. The clamp design also provides versatility in that the offset position can be rotated in 360 degrees. So the offset is not just fixed linearly only in one direction, but that with rotation of the tube, the offset can be linearly set 5mm from the center in any direction. Apply recommended torque to pylon clamp screws and alignment adjustment screws for connection. Apply Loctite to all screws once the alignment and connection is finalized.
All ST&G Titanium components are waterproof. (If exposed to salt water, exercise proper care post exposure by thoroughly washing and drying the titanium product)
