PARALEX Technical Data
Cutting PARALEX Fiber:
• Before cutting PARALEX fiber, tape the edge of the fiber with
masking tape then cut down the middle of the tape line.
• Use a scissor with a serrated edge.
• If you attempt to cut PARALEX fiber with a smooth bladed scissor,
use very sharp scissors then fold the braid over on itself – (doubling
up) greatly helps.
Lamination:
For the best edging results, the use of Perlon, Nylons or
1/2oz Dacron felt is ideal as the first layer and the last layer.
• For best results use 80:20 resin
Grinding:
• Use high speed and low pressure.
• Only use sharp abrasives, dull abrasives will create friction and will
“burn off” the resin and leave exposed fibers at your edge.
Edging Techniques:
(The use of inner and outer finish layers is required. See example
TT & TF Layup.)
Finishing edge instructions:
Finish as you would any composite by wet sanding using 220 grit and
finish with 400 grit wet/dry sanding paper.
